kdele

Mapdl.kdele(np1='', np2='', ninc='', **kwargs)

Deletes unmeshed keypoints.

APDL Command: KDELE

Parameters
  • np1 – Delete keypoints from NP1 to NP2 (defaults to NP1) in steps of NINC (defaults to 1). If NP1 = ALL, NP2 and NINC are ignored and all selected keypoints [KSEL] are deleted. If NP1 = P, graphical picking is enabled and all remaining command fields are ignored (valid only in the GUI). A component name may also be substituted for NP1 (NP2 and NINC are ignored).

  • np2 – Delete keypoints from NP1 to NP2 (defaults to NP1) in steps of NINC (defaults to 1). If NP1 = ALL, NP2 and NINC are ignored and all selected keypoints [KSEL] are deleted. If NP1 = P, graphical picking is enabled and all remaining command fields are ignored (valid only in the GUI). A component name may also be substituted for NP1 (NP2 and NINC are ignored).

  • ninc – Delete keypoints from NP1 to NP2 (defaults to NP1) in steps of NINC (defaults to 1). If NP1 = ALL, NP2 and NINC are ignored and all selected keypoints [KSEL] are deleted. If NP1 = P, graphical picking is enabled and all remaining command fields are ignored (valid only in the GUI). A component name may also be substituted for NP1 (NP2 and NINC are ignored).

Notes

Deletes selected keypoints. A keypoint attached to a line cannot be deleted unless the line is first deleted.