swlist

Mapdl.swlist(ecomp='', **kwargs)

Lists spot weld sets.

APDL Command: SWLIST

Parameters
ecomp

Name of an existing spot weld set that was previously defined using SWGEN. If Ecomp = ALL (default), all spot weld sets are listed.

Notes

This command lists spot weld node, beam, and contact pair information for all defined spot weld sets, or for the specified set. To ensure that all defined spotwelds are listed, issue CMSEL,ALL (to select all components) before issuing the SWLIST command.

When SWLIST is issued in POST1, the beam forces and moments are output. For the case of a deformable spot weld, the stresses are also output in the beam local coordinate system.