vdele

Mapdl.vdele(nv1='', nv2='', ninc='', kswp='', **kwargs)

Deletes unmeshed volumes.

APDL Command: VDELE

Parameters
  • nv1 – Delete volumes from NV1 to NV2 (defaults to NV1) in steps of NINC (defaults to 1). If NV1 = ALL, NV2 and NINC are ignored and all selected volumes [VSEL] are deleted. If NV1 = P, graphical picking is enabled and all remaining command fields are ignored (valid only in the GUI). A component name may also be substituted for NV1 (NV2 and NINC are ignored).

  • nv2 – Delete volumes from NV1 to NV2 (defaults to NV1) in steps of NINC (defaults to 1). If NV1 = ALL, NV2 and NINC are ignored and all selected volumes [VSEL] are deleted. If NV1 = P, graphical picking is enabled and all remaining command fields are ignored (valid only in the GUI). A component name may also be substituted for NV1 (NV2 and NINC are ignored).

  • ninc – Delete volumes from NV1 to NV2 (defaults to NV1) in steps of NINC (defaults to 1). If NV1 = ALL, NV2 and NINC are ignored and all selected volumes [VSEL] are deleted. If NV1 = P, graphical picking is enabled and all remaining command fields are ignored (valid only in the GUI). A component name may also be substituted for NV1 (NV2 and NINC are ignored).

  • kswp

    Specifies whether keypoints, lines, and areas are also deleted:

    0 - Delete volumes only (default).

    1 - Delete volumes, as well as keypoints, lines, and areas attached to the

    specified volumes but not shared by other volumes.