mlist

Mapdl.mlist(node1='', node2='', ninc='', **kwargs)

Lists the MDOF of freedom.

APDL Command: MLIST

Parameters
  • node1 – List master degrees of freedom from NODE1 to NODE2 (defaults toNODE1) in steps of NINC (defaults to 1). If NODE1 = ALL (default), NODE2 and NINC are ignored and masters for all selected nodes [NSEL] are listed. If NODE1 = P, graphical picking is enabled and all remaining command fields are ignored (valid only in the GUI). A component name may also be substituted for NODE1 (NODE2 and NINC are ignored).

  • node2 – List master degrees of freedom from NODE1 to NODE2 (defaults toNODE1) in steps of NINC (defaults to 1). If NODE1 = ALL (default), NODE2 and NINC are ignored and masters for all selected nodes [NSEL] are listed. If NODE1 = P, graphical picking is enabled and all remaining command fields are ignored (valid only in the GUI). A component name may also be substituted for NODE1 (NODE2 and NINC are ignored).

  • ninc – List master degrees of freedom from NODE1 to NODE2 (defaults toNODE1) in steps of NINC (defaults to 1). If NODE1 = ALL (default), NODE2 and NINC are ignored and masters for all selected nodes [NSEL] are listed. If NODE1 = P, graphical picking is enabled and all remaining command fields are ignored (valid only in the GUI). A component name may also be substituted for NODE1 (NODE2 and NINC are ignored).

Notes

Lists the master degrees of freedom.